C2200: Anti-Lock Brake Module Internal Failure (Chrysler/Ram)
Severity: high
What it means: On Chrysler, Dodge, Jeep and Ram vehicles, the ABS module has detected an internal electronic failure.
Safe to drive? Use caution. Normal brakes usually still work, but ABS, traction and stability control are off. Drive gently and get it repaired soon.
Common symptoms
- ABS, traction control and brake warning lights
- Stability control off
- Speedometer or other modules may act up on some trucks
Likely causes, ranked
- Internal ABS module failureShop
- Low battery voltage or poor groundsDIY
- Wiring or connector fault at the moduleShop
Vehicle-specific notes
- 2014–2018 Ram 1500: Owners report C2200 ABS module failures, fixed with a rebuilt or replacement module. Read the full answer · Source
What it means: On Chrysler, Dodge, Jeep and Ram vehicles, the ABS module has detected an internal electronic failure.
Severity: High. Safe to drive? Use caution. Normal brakes usually still work, but ABS, traction and stability control are off. Drive gently and get it repaired soon.
DIY or shop?
Shop. Owners use a rebuilt or new ABS module. A replacement may need programming.
Before you replace parts
- Read all stored codes with a scan tool that can talk to the ABS, steering or body modules, not just the engine computer.
- Check battery voltage, grounds and the module connectors first. Low voltage can set chassis codes.
- Check your VIN for recalls, service bulletins and extended coverage.
- Clear the code only after a repair, then confirm it stays off.
Safety / mechanic note
Verify with a mechanic. ABS and stability control help you stop and steer in an emergency. A code points to a circuit or system, not always a specific part.